Ladle scales, scrap special scales, wireless / wired remote data transmission calibration

Scope

※ composition with CS3120T supporting wireless data transmission remote weighing system.
※ with CS3120S supporting components wired data transmission distance weighing system.
※ with CS3120E/ES/H (with wireless transmitters) supporting the composition of wireless digital remote weighing control system.
※ For steel chartered (hot metal tank) vehicle electronic scales, electronic scales large ladle turret, vehicle electronics, etc. for use in mobile or remote use of electronic scales electronic scales.

Features

※ Set weighing instruments with wireless / wired data transmission in one.
※ Electronic Scale Wireless / wired remote calibration.
※ wireless digital instrument use high wireless data radio. Data transmission, high sensitivity, low error rate, stable performance and high reliability.
※ All calibration settings are to achieve front panel operation. And user-friendly, easy to learn.

Main features

※ weighing measurement channel automatic calibration and manual calibration function.
※ transmitter output channel automatic calibration and transmitting range arbitrarily set migration.
※ password address mode is set operating parameters, control parameters and access to a variety of calibration.
※ Yu-programmable digital filtering.
※ auto-zero, auto-timer back to zero and negative automatic zeroing.
※ fixed value control. Overload alarm function.
The main technical indicators
※ Operating frequency :223-235MHz ,447-453MHz
※ channels: 16 or 48 * (Note: with * for the import module index)
※ Modulation: DSSS or MSK *
※ Transfer Rate: 1200bit / S or 2400bit / S *
※ Frequency stability: ± 5ppm or 3ppm *
※ transmission distance (unit: m)

※ analog outputs: one (or Road) independent programmable standard current and voltage signals
4 ~ 20mA when the load resistance ≤ 600Ω; 0-10mA when ≤ 1.5KΩ
1 ~ 5V, 0 ~ 5v when ≥ 10KΩ, 0 ~ 10V when ≥ 20KΩ
Accuracy: 0.15% F.S
※ serial communication interface RS-232C, 20mA current loop optional
NOTE: When transferring a number of commonly used 20mA current loop transmission. Transmission distance ≤ 200m
※ Road Relay Output Interface: Output normally open (NO or NC) contacts (250V 5A)
※ Display: 0.8 inches six red LED digital tube
※ external display interface: can drive external monitors connected in parallel to three
※ Environment: Power AC220 +22 V/AC220-33V, 50 ± 1Hz
Temperature -10 ~ 50 ℃
Humidity 40 ℃ (20-90)% RH
※ installation, shape, openings
(Shape: width × height x depth or thickness hole: width × height unit: mm)