Materials: Alloy steel

>Supported at two ends and receiving stress in their middle parts, our sensors feature a broadened range of weighing distance, good accuracy and stable performance.
>Can be used in various electronic weighers for vehicles. material hopper weighers and dynamo metric apparatuses.
>Automatic reset, resistant to deviation and laterality, easy to install and put into use. good inter changeability.

Sensitivity	2.0mv/v
Non linearity	±0.02～±0.05%FS
Hysteresis	±0.02～±0.05%FS
Repeatability	0.02%FS
Creep	±0.02～±0.05%FS/30min
Creep recovery	±0.02～±0.05%FS/30min
Zero balance	2%FS
Zero temperature coefficient	0.03～0.05%FS/10℃
Rated output temperature coefficient	0.03～0.05%FS10℃
Output resistance	700Ω
Insulation resistance	≥3000MΩ
Supply Voltage	5～15V
Safe temperature range	-30～+60℃
Safe overload	130%FS
Defend grade	IP67
Method of connecting wire	input：Red(+)Yellow(-) output：Blue(+)White(-)